Panasonic KX-FMC230 Operating Instructions Manual page 24

Setting your logo
The logo can be a company, division or personal name in an abbreviated form.
Press _.
Display: [SYSTEM
SET UP ]
Press _,then [][].
[ YOUR LOGO I
Press ISTART/COPY/SETJ.
i LOGO= I
Enter your logo up to 30 characters using the
dial keypad and direct call station keys.
For example, when entering "Bill" as your logo:
1. Press [] twice.
I LOGO=B I
2. Press [] six times.
I LOGO=Bi I
3. Press
[]
six times.
I LOGO=Bil [
4. Press _ ((VOLUME_) to move the cursor
and press [] six times.
I LOGO=Bill I
Note:
elf you use the same number key continuously
to enter the next character, press
(_) to move the cursor.
Press (_START/COPY/SET_.
-- I SETUP ITEM [ ] I
Press _.
To correct a mistake while
programming
Press _ (_) to move the cursor to
the incorrect character, then make the corrections.
OR
Press _ to delete the character to the left of
the cursor.
Direct call
Dial keypad station keys
VOLUME
[ START/COPY/SET)
Character table
Keys Characters
O 1 [1{}+-/=,._
(_ ABCabc2
(_) D E F d e f 3
(_ GHIghi4
Dial (_ J K L j k I 5
keys (_ M N O m n o 6
(_ PQRSpqrs7
O TUVtuv8
(_) W X Y Z w x y z 9
: ; ? I • @ ^'--_
INSERT key (Used to insert one
character or one space.)
Direct _ SECRET key (Used for automatic
call dialing on page 37.)
station _] SPACE key (Used to replace one
keys character with a space.)
DELETE key (Used to delete one
character.)
HYPHEN key (Used to insert a
' hyphen.)
_ key (Used to move the cursor to
the left.)
I_ key (Used to move the cursor to
[_ the right.)
24