Troubleshooting; Maintenance; Supplied Accessories; Specifications - Sylvania SRTL313 Owner's Manual

Idll_falfl
V-CHIP enables parents to prevent their chil-
dren from watching inappropriate material on
TV.
V-CHIP reads the ratings for programming
(except for news and sports programs, unedit-
ed movies on pl_mium cable channels, and
Emergency Broadcast System signals), then
denies access to programming if the program's
rating meets or exceeds the limitations you
select. In this case, "PROTECTED PRO-
GRAM by ..." message appears on the TV
screen.
To block certain ratings, follow the steps
below.
• Programming may be rated by the Motion
Pictm_ Association of America (MPAA) or
according to the Television Parental
Guidelines. In order to block any inappro-
priate programming, set your limits in both
places (MPAA RATING and TV RATING).
• You cannot access the menu when the
"PROTECTED PROGRAM by ..." message
appears. In this case, change to an
unblocked channel, then press the MENU
button.
[MPAA RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) •
PICTURE
or • button to point to CHANNEL SET
"V-CHIP SET UP". IENGI /BsP / PBA
VCHIP SET UP
Then, press the CAPTION [OFF]
TV SOUND [MAIN]
VOL(ume) • button.
3) Use the number buttons (
to enter 4-digit access |
ACCESS C ODE
code. The default | [SZSZSZSZS]
access code is 0000. If [
you have not set up your
personal access code, you should use 0000.
4) Press the CH(annel) • or • button to point
to "MPAA RATING".
TV RATING
Then, press the ,- MPAA R ATING
VOL(ume) • button.
CHANGE CODE
5) Press the CH(annel) • /i,- G
FLEW]
or • button to point to
k IGIpIG.13
[VIEw][VIEW]
your desired item. lvmw]
Then, press the c47 [viEw]
[V_EW]
VOL(ume) • button to
select [BLOCK] or [VIEW].
<Selection>
• G:
• PG:
• PG-13:
• R:
• NC-17:
• X:
<Rating Category- Explanations>
General Audience
Parental Guidance suggestad.
Unsuitable for children under 13
Restricted; under 17 requires
accompanying
parent or adult guardian
No one under 17 admitted
Mature audience only
When you select the rating category and
turn it to [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the
lower rating will turn [VIEW] automatically.
• When you turn "G" to [BLOCK] or
[VIEW], the all ratings will turn to
[BLOCK] or [VIEW] automatically.
• When you turn "X" to [VIEW], then all rat-
ings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[TV RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) • or • button to point
to "V-CHIP SET UP".
Then, press the VOL(ume) • button.
3) Use the number buttons to enter 4-digit
access code. The default access code is
0000. If you have not set
up your personal access ACCESS CODE
code, you should use
0000.
4) Press the CH(annel) •
or • button to point to
IP TV BATING
"TV RATING". Then,
MPAA RATING
press the VOL(ume) •
CHANGE CODE
button.
5) Press the CH(annel) •
or • button to point to ,- wY IV_EW]
your desired item. TV-Y7{ ) [VIEW]
TV-G [VIEW]
Then,
press the
TV-PG( ) [VIEW]
VOL(ume) • button to
w-t4( t [V_EW]
TV-MA{ ) [VIEW]
select [BLOCK] or
[VIEW].
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check the_ items. It could save you time and money.
l i,]1 [lU UlII I1I'!:11 I1N IKq[II I 1,1] K_ql
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then IXlssible station trouble
Is TV plugged in'?
Power at oudet?
Is TV's POWER burton on?
Is antenna connected to terminal on [he back of the set?
If outside antenna is b_'ing used, check fur brnken wire
Check fur local [merffrenc_"
Turn off with POWER button and lhen turn it on after ab_mt a minute
Adjust COLOR control
Adjust CONTRAST & BRIGHT control
Check batteries in Remote Cnntrnl
Mo_e the TV away tom [he nearby appliances which have Magnetism
Turn off using the POWER button, _hen [urn it on again 30 minutes or so later
Temperatm_ around is too row
Life of the Back Light is appmxlmmely 50,000 hours Ask [he Service Center m l_p[ace
E
x
x
xx
x
x
x
=
5C
6
x x
x
x x
x
x
E
0 =
xx x
x
x
x x
xx x
x
x
x
x
x
1!_!|Illlt111/III1i118 I:I;IIII_N'!_I I '_l/_lllil[l_klll[!N_
1[ is quality of the LCD Panel
Closed Caption Problem Possible Remedy
My TV is showing captions thai are You are watching a live broadcast and spelling errors made by the
misspelled, closed captioning production company may pass through uncorrecl-
ed. A prerecorded program will not show any misspelled words
)ecause of the normal time available lbr editing the captions.
My TV will not show the text in its entirety Captions thai are delayed a few seconds behind the actual dialogue
or there is a delay of what is being said. are common for live broadcasts. Most captioning production compa-
nies can display a dialogue _o a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used it insure that
the captions remain up-to-date with the current TV screen dialogue.
My captions are scrambled with white Interference caused by building, power lines, lbunderstorms, etc.
boxes on the TV screen, may cause scrambled or incomplete captions to appear.
My program guide listed a TV show as Broadcasters may al times use a time compression process to due
being closed captioned actual program so that additional advertising time can be given.
but none of the captions were displayed. Since II_edecoder cannot read the compressed information, captions
will be lost.
My prerecorded videotape does not show The videotape was either an illegal copying or the tape duplicating
any caplions. The tape box mentions it company accidentally left out the captioning signals during the
being closed captioned, copying process.
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAtrFION
channels. IOFF].
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non
active pixels may appear as a tiny spec of color. This in not to be considered a broken LCD
screen.
<Selection>
Explanations>
• TV-Y:
• TV-Y7:
• TV-G:
• TV-PG:
• TV-14:
• TV-MA:
<Rating Category-
Appropriate for all children
Appropriate for children seven and
older
General Audience
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
When you select the rating category and turn
it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
• When you turn "TV-Y" to [BLOCK] or
[VIEW], then all ratings will turn to
[BLOCK] or [VIEW] automatically.
• When you turn "TV-MA" to [VIEW], then
all ratings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
IV-CHIP SET UP SUB RATINGS]
When you select TV-Y7, TV-PG, TV-14, or TV-
MA and you press the VOL(ume) • button, the
sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-
PG) and turn it to [BLOCK] or [VIEW], the
sub-ratings (example: V for Violence) will turn
[BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or
[VIEW] individually when the rating category
is set to [BLOCK]. To set the sub-ratings indi-
vidually, follow the steps below.
• When you select [TV-Y7]:
Press the CH(annel) •
or • button to select
"FV" (Fantasy TV-Y7 tBLOCK]
Violence). Then, press ,- FV [BLOCK l
the VOL(ume) • but-
ton to select [BLOCK]
or [VIEW]. ,- TV-Y [VIEW]
• When you select [TV-
TV-Y7{ ) [VIEW]
TV-G [BLOCK]
PG], [TV-14] or [TV-
TV-PG(DLSV) [BLOCK 1
MA]: TV-14 (DLSV) [BLOCK]
Press the CH(annel) •
TV-MA(LSV) IBLOCK]
or • button to select
"D" (Suggestive
TV*PG
[BLOCK]|
Dialog), "L"(Coarse
/
Language), "S"(Sexual _,D [BLOCK]/
L [BLOCKI|
Situation), or "V" S [BLOCKI /
(Violence). Then, press V
[BLOCKIJ
the VOL(ume) • but-
ton to select [BLOCK] or [VIEW].
Note: When you select [TV-MA], "D" does
not appear on the TV screen.
MAINTENANCE
• The sub-ratings which set to [BLOCK]
appear next to the rating category in the TV
RATING menu.
IV-CHIP ACCESS CODE]
To change access code, follow steps.
l)Press the MENU button, then press the
CH(annel) • or • but-
ton to select V-CHIP PICTURE
CHANNEL SET
SET UP. Press the
[ENG]/ESP/PRA
V-CHIP SET UP
VOL(ume) • button to CAPTION [OFF]
continue.
2) Press the number buttons to enter your old
access code. If you
ACCESS CODE
have never set up your
personal access code,
use 0000.
3) Press the CH(annel) • or • button to select
CHANGE CODE.
Then, press the /
TVNAAA_NTGING
VOL(ume)
• button to _ CHANGE CODE
/
continue.
L
4) Use the number buttons to enter your desired
access code in the (_
NEW CODE space. | NEW CODE
Then, enter the same | CONF_BM C ODE
code in the CONFIRM _ CZZZZZZ_
CODE space. Your new access code is set.
You will return to the "V-CHIP SET UP".
If the code in the CONFIRM CODE space does
not match the code in the NEW CODE space,
repeat step 4, making sure you enter the same
new code exactly in the CONFIRM CODE
space.
NOTES:
• If a power failure occurs, the default code,
0000, will be the active access code again.
• If you connect the power cord to an AC out-
let that is controlled by a wall switch, your
personal access code will be erased every
time you turn off the power at the wall
switch. The default code will be the active
code again.
[IF YOU FORGET YOUR ACCESS CODE]
You should restore the access code to default
code, 0000. To restore 0000 as your personal
access code, unplug the TV's power cord for 10
seconds, then plug it in again.
• Wipe the front panel and other exterior sur-
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
If the liquid crystal display panel should
require cleaning, wipe it with a cotton or soft
cloth. Before cleaning the picture screen, dis-
connect the power cord.
SUPPLIED ACCESSORIES
Remote control unit
(NEI23UD)
Batteries ("AA" x 2)
AC coM
AC adapter
RF cable
Owner's Manual
SPECIFICATIONS
Television system: NTSC-M
TV Standard
Closed Caption System: §15.119/FCC
Channel coverage
VHF:
UHF:
CATV:
Tuning System:
Channel access:
Terminals
Antenna input:
2-13
14 ~ 69
2 - 13, A -W,
W+l ~ W+84,
A-5 ~ A-l, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
S-Video input: Mini DIN 4-pin jack
Video input: RCA connector
Audio input: RCA connector x 4
Component video input:
One pin jack (Y), I Vpp(75 ohm)
Two pin jacks (P_)!(Pa), 700mVpp(75 ohm)
Headphone: 1!8" monaural(3.5 ram)
Stereo Sound System
2 speakers
2 ways AV input
Sound output: 1W, 8 ohm x 2
Remote control: Digital encoded
infrared light system
Operating temperature: 5°C to 40°C (41 °F~104°F)
Power requirements: DCI2V
Power consumption(Maximum): 41W(SRTL313)
44W(SRTL315)
LCD: 13"(SRTL313)
15"(SRTL315)
SRTL313
Dimensions(H x W x D):
Photo Stand open
9-15/16"(252.5mm) x 16-5/_"(422mIn ! x 5-7/8"(148.5mm)
Photo Stand close
10-5/8"(270.5mm) x 16-5/8"(422mm) x 2-1/8"(53.5mm1
Weight:
With Photo Stand: 7.3 lbs. (3.3kg)
Without Photo Stand: 6.8 lbs. (3.1 kg)
SRTL315
Dimensions(H x W x D):
With Tilt Stand
12-5/16"(313.5mm) x 18-1/8"(460mm) x 9-7/16"(240.5mm)
Without Tilt Stand
11-13/16"(Nl0.5n_m) x 18-1/8"(460mm) x 2-1/8"(53.5mm)
Weight:
With Tilt Stand: 9.3 lbs. (4.2kg)
Without Tilt Stand: 82 lbs. (3.7kg)
•Designs and specifications are subject to
change without notice and without our
legal obligation.
• If there is a discrepancy between languages,
the default language will be English.