Page 1
Operating instructions Pool Cover/Winter Cover 64827–64831 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
Page 2
The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
Page 3
Control the water level and make sure that it is not larger than the built-in parts. • Use a winter protecting agent to prevent algae from forming. • Prevent damages caused by frost by using ice softening cushions or winter cushions under the cover. https://www.XPOtool.com Item 64827–64831 Page 3 10 2023-1...
Page 4
Make sure that the cover is properly secured or weighted down to prevent the cover from being pulled into the pool in case of high snow loads or strong winds. Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 64827–64831 Page 4...