anko 43310852 Assembly Instructions

200x280mm
anko尺寸 35X11.2mm最小字体高度：2.1mm
43310852
• Please read this assembly instruction carefully and check parts against the list below before assembling your tree.
• Take a few moments to familiarise yourself with the contents.
• Please retain this assembly instruction and box for future reference and storage purpose.

Part list

Assembly

1. Choose a location where the tree is to be displayed. Take all the components out of the
carton to assemble. Ensure this is placed on a flat, level surface.
2. Carefully insert the tree base pole (Part C) and slide each leg (Part A) upward into the
corresponding slot on the tree base. (See Step 1)
3. Insert all the remaining poles (Part D) into the tree base pole (Part C) one by one and push
down into position. (See Step 2, 3 & 4 )
4. Hold the tree vertically and place the tree section (Part B) at the top of pole (Part D) and let
tree fall around pole to make the tree shape as per the images on the product box. Ensure
the poles (Part D) pass through all the supporting rings at the middle of each tree layer
(Part B). (See Step 5, 6 & 7 )
5. The assembled tree picture has been shown in Step 8.
C
Step 1
LOW VOLTAGE 1.2M CHRISTMAS LIGHT UP TINSEL TREE
ASSEMBLY INSTRUCTIONS
Part
A
B
C
D
D
INSERT
POLE
HERE
Step 3
C
A
A
Step 2
Component
D
Step 5
D
D
C
A
Step 4
Step 6
front
Quantity
4
1
1
3
B
B
D
(BOTTOM)
plastic
stopper
B
D
D
B
C
A
D
Step 7 Step 8