anko JT-DC12V7.2W-E4 Quick Start Manual
anko JT-DC12V7.2W-E4 Quick Start Manual

anko JT-DC12V7.2W-E4 Quick Start Manual

Low voltage 4ft santa inflatable

Advertisement

LOW VOLTAGE 4FT SANTA

INFLATABLE

These instructions are for your safety. Please read through them thoroughly
before use and retain for future reference.

Before You Start

Decide on an appropriate location for your product (see Installation instructions below).
If you have any doubt about installing this product, consult a qualified electrician.

Installation instructions:

1) This inflatable product is suitable for
INDOOR AND OUTDOOR USE.
2) The AC adaptor
MUST
be installed
INDOORS
3) Do not position or place near heaters of any other direct sources of heat.
4) This product is suitable for positioning on surfaces which have normal flammability,e.g.wood, plasterboard,
masonry. However this does not include highly flammable surfaces(e.g.polystyrene, textiles).
5) Always position cables and extension leads so that they will not be a hazard to the elderly, pets and children.
6)
position this inflatable product where it may become covered by other items e.g. curtains,
DO NOT
nets or bedding.
7) Ensure the unit is positioned so that you have enough cable to reach an indoor mains power socket.
away from weather.
Warning
This inflatable product is suitable for
INDOOR AND OUTDOOR USE.
This product is
NOT
designed for permanent or long term use.
The AC adaptor
be installed
MUST
INDOORS
The supplied adaptor is suitable for operation of LED Modules only.
Only operate this light chain with the supplied adaptor,
Do not connect this inflatable product electrically to another inflatable product.
Do not connect this light chain to the power supply while it is in the packaging.
attempt to replace the non-replaceable bulbs in this inflatable product.
DO NOT
Never allow any part of the set to come into contact with a source of heat or flame.
Care must be taken to avoid damage the cable or fittings.
If any part of light set or cable is damaged, the light set MUST be discarded.
This product is for use as a decoration only. Not to be used by children as a toy. Keep out of reach
of children.
Do not position this light chain where it will be exposed to extreme wet weather or submerged in water.
Always switch off this light set or unplug an adaptor if unattended.
DO NOT overload power sockets or extension leads.
DO NOT pierce the cable when securing in place, bend or stand on the light chain, as this will damage the
bulbs or wiring.
Please refer to the packing or product rating label for product class, specifications and rating.

LED Bulbs

This light set is constructed with non-replaceable bulbs. DO NOT attempt to replace any of the bulbs in the
light set.
Keycode:
43069835
away from weather.
Model No. JT-DC12V7.2W-E4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JT-DC12V7.2W-E4 and is the answer not in the manual?

Questions and answers

Summary of Contents for anko JT-DC12V7.2W-E4

  • Page 1 ● The supplied adaptor is suitable for operation of LED Modules only. ● Only operate this light chain with the supplied adaptor, Model No. JT-DC12V7.2W-E4 ● Do not connect this inflatable product electrically to another inflatable product. ● Do not connect this light chain to the power supply while it is in the packaging.
  • Page 2 Input Rated Output Rated Model No. Voltage Frequency Current Voltage Power JT-DC12V7.2W-E4 220-240VAC 50-60Hz 0.10A Max 12V AC 7.2W 2. Do not open the cover of the equipments. 3. For use with LED lighting equipment. 4. The input and output voltage should be checked before use to ensure correct use.

Table of Contents