Related Manuals for ALLCUT Twis Tech 28
Summary of Contents for ALLCUT Twis Tech 28
- Page 1 Operating Instructions for ALLCUT TwisTech 28 Twis Tech THANKS FOR PURCHASING ALLCUT MAGNETIC DRILL MACHINE...
-
Page 2: Table Of Contents
GENERAL INSTRUCTIONS TABLE OF CONTENT INTENDED USE General instructions The ALLCUT 28 magnetic drilling machine is uniquely Machine overview designed to be used for drilling operations using twist Safety measures drill on magnetic metals, for cutting threads, and reaming within the limits specified in the technical data. -
Page 3: Machine Overview
MACHINE OVERVIEW SR. NO. MACHINE PART MAIN BODY PINION SR. NO. PANEL HANDLE MOTOR ON/OFF SWITCH PANEL FUSE HOLDER PLATE HANDLE MAGNET ON/OFF SWITCH UNIVERSAL PLATE ELECTROMAGNET STEEL WEDGES MT-3 SHANK OPENING FOR EJECTOR PIN DRILL MOTOR STEEL SLIDE TwisTech 28... -
Page 4: Safety Measures
SAFETY MEASURES NOTE DANGER Danger from electric current! When using electrical tools, please read and follow the following precautions to prevent any type of injury, fire or Contact with live wires or components may lead to serious injury to the operator. electric shock. - Page 5 SAFETY MEASURES, BEFOR USING FOR THE FIRST TIME NOTE WARNING Check for any visible signs of damage or missing items on Always switch off the machine when changing tool, delivery. Report an incomplete or damaged delivery to your conducting maintenance or cleaning. Wait till the dealer/supplier/manufacturer.
-
Page 6: Preparing
PREPARING, STARTING ON THE MACHINE Check the condition of Switching the machine ON/OFF the surface First turn on the magnet switch (4.3). Then turn ON the machine with the green button (I) on The magnetic force is dependent on the condition of the the drill switch (4.1). -
Page 7: Using The Machine
USING THE MACHINE Drilling with the machine Reaming with the machine The ALLCUT 28 is a multi-purpose magnetic drill machine, that can also be used for reaming purpose. NOTE The ALLCUT TwisTech 28 is designed to be used with ATTENTION twist drills. -
Page 8: Removing Blockages
REMOVING BLOCKAGES, CLEANING, MAINTENANCE Removing blockages Cleaning the machine WARNING WARNING Risk of injury due to broken tool or metal chips. Make sure to switch OFF (4.3) completely and remove Always use protective gloves when using the machine. the main cord from the main socket. When using compressed air for cleaning or removing Blockages caused by broken tool: metal chips, wear the protective goggles and gloves for... -
Page 9: Storage
If the machine is too damaged or cannot be repaired by you, If you are not planning to use for a long time, clean the please contact ALLCUT team/dealer/supplier. We will be machine as described in the CLEANING SECTION. Store the happy to provide you with best service. -
Page 10: Spare Part List
SPARE PARTS LIST Stand Parts Motor Parts TwisTech 28... -
Page 11: Wiring Drawing
WIRING DRAWING Drill Switch Rectifire Magnet Switch Fuse Holder Main plug Electromagnet TwisTech 28... - Page 12 EXPERIENCE HAPPY AND SAFE DRILLING WITH ALLCUT MAG DRILLS...
Need help?
Do you have a question about the Twis Tech 28 and is the answer not in the manual?
Questions and answers