Related Manuals for Lost Audio M Series
Summary of Contents for Lost Audio M Series
- Page 1 Lost Audio GmbH & Sumatronic AG M-DAB-51/10 DAB+ Tuner Module suitable for ReVox M51/M10...
-
Page 2: Table Of Contents
DAB+ Tuner Module M-Serie Table of contents DAB+ Tuner Installation Store stations Browse, listen and delete stations Move station Listen to stations Tuning by quickselection Settings Setup page 2 Setup page 3 Setup page 4 Synchronization M208 Remote settings for remote controls Antenna Troubleshooting No reception with active antenna... -
Page 3: Dab+ Tuner
DAB+ Tuner Module M-Serie Installation DAB+ Tuner The module is equipped with DAB and DAB+ is the new sensitive electronics, touch the generation of broadcasting module only at the edges or at the technologies in which the radio sheet metal. Do not touch the signal is transmitted completely components on the board. -
Page 4: Store Stations
DAB+ Tuner Module M-Serie signal with the sumaDAB DAB+Cable adapter into normal DAB+ signals and receive them with the DAB module. In this case, the antenna is unnecessary. Cable reception is usually simple and trouble-free. Currently, UPC (Switzerland) and their partners offer DAB+Cable with about 90 radio programs on their On the picture you can see the jumper in open position ->... - Page 5 DAB+ Tuner Module M-Serie At the end all found radio stations are stored. It is also checked whether these are not merely data services. The latter are not radio stations, ergo do not transmit music and are therefore automatically deleted during the saving process. Therefore, it can happen that more Now you can execute the automatic stations are displayed during the...
-
Page 6: Browse, Listen And Delete Stations
DAB+ Tuner Module M-Serie At the end, the number of stored and not for the long DAB+ radio stations is displayed. Here, 2 names.) data services were filtered out of the 4. Channel and frequency on which 36 stations, so there are still 34 radio the whole station package is stations. -
Page 7: Move Station
DAB+ Tuner Module M-Serie Move station The stations are basically stored alphabetically. However, you can also define your own sequence. To do this, press the MOVE soft key. Now you are in the menu where you can move the radio stations according to your wishes and thus arrange them. -
Page 8: Listen To Stations
DAB+ Tuner Module M-Serie The key number is always displayed Listen to stations in the margin. However, the display of the M51 is only designed up to 50. As a result, stations that exceed the As soon as you select the DAB+ maximum mark of 50 cannot be source on your M100 / M51, the last displayed numerically. -
Page 9: Tuning By Quickselection
DAB+ Tuner Module M-Serie Tuning by quickselection Since many stations are received with DAB+, searching by scrolling is a test of patience. Therefore, there is still a quick selection function. To do this, press the NEXT soft key for two seconds: Now you are in the radio station quick selection. -
Page 10: Settings
DAB+ Tuner Module M-Serie Equalizer Settings With the two second uppermost soft keys you can select one of the pre- Various settings can be made on the defined equalizer settings that apply DAB+ tuner. You can access these if to all radio stations. you have DAB+ active as a source and press the SETUP key for two •... - Page 11 DAB+ Tuner Module M-Serie Analog or S/PDIF Setup page 3 The output signal of the DAB+ tuner can be selected with the A/D setting. This feeds the analog balanced or digital S/PDIF signal into the M51. Depending on your preference, this can be selected here.
-
Page 12: Setup
DAB+ Tuner Module M-Serie FactoryReset Setup page 4 To reprogram the DAB+ tuner from scratch, the entire memory contents can be erased. To do this, press the FactoryReset button for two seconds. After this reset, the entire system should be completely switched off and switched on again. -
Page 13: Synchronization M208
DAB+ Tuner Module M-Serie Synchronization M208 The M208 remote control can transfer the FM tuner's station list to itself with the M208-Link adapter and is limited to a maximum of 63 radio stations. The DAB+ tuner also offers this function, but it requires an option that must be switched on briefly. -
Page 14: Remote Settings For Remote Controls
DAB+ Tuner Module M-Serie Remote settings for remote controls In order for the commands from the infrared remote controls and from wall remote controls to the DAB+ tuner to work, this must be configured in the M51. (Otherwise the commands go to a possible FM tuner). -
Page 15: Antenna
DAB+ Tuner Module M-Serie Antenna Troubleshooting Connect a suitable antenna to the F No reception with active socket on the back of the tuner. antenna Please screw it only by hand! If you use an active antenna, which My M51 cannot receive radio requires a 5V supply, it can be stations with an active DAB antenna. -
Page 16: Technical Data
DAB+ Tuner Module M-Serie Technical data Frequency range: 174 - 240 MHz Frequency band: 5A – 13F Channels: Sensitivity: -99dBm Broadcast type: DAB and DAB+ Antenna connection: F-Socket for 50 or 75 Ohm Phantom power antenna: 5V ±10%, max. 30mA Warranty General The warranty is 24 months from the...