Table of Contents
Advertisement
DANGER
> Risk of electric shock, short
circuit or fire by unprofessional
installation!
The appliance may be connected
to the mains supply only by an
authorized qualified person and the
appliance is only guaranteed after
correct installation.
DANGER
Risk of electric shock, short
circuit or fire by damage of the
mains lead!
The mains lead must not be
clamped, bent or trapped or come
into contact with hot parts of the
appliance.
If the mains lead is damaged, it
must be replaced by a qualified
electrician.
The mains supply data must correspond to
the data specified on the rating plate of the
appliance. The rating plate is located at the
rear housing of the appliance.
The supply cable of the appliance must
correspond to the specifications; see
technical data table Technical Data, page 5.
[1] Important
The plug should be easily
accessible after installation (but not
above the hob).
Plug the mains lead into the socket.
Installing cooktop legs
1. Remove all pieces that may fall down
from the top of the cooktop, overturn it
and place on a flat surface.
2.
Install the 4 legs supplied with your
product to their slots on the corners of
the cooktop.
3.
Proper installation is confirmed by the
click sound while inserting the legs.
Final check
1. Turn on gas supply.
2. Check gas installations for secure fitting
and tightness.
3.
Ignite burners and check appearance of
the flame.
Ө
10 | EN
Important
The flames should be blue and
burn smoothly. If the flames
appear yellowish, check secure
position of the burner cap or clean
the burner. Switch off gas and let
burner cool before touching it.
Advertisement
Table of Contents
