HONEY JOY BC10064 Manual page 2

● Never attempt to put hand or fingers into the inflation/deflation port at any
time.
● Do not keep/use the pump and plug in wet condition.
● Never allow sand, small rocks, etc. to be sucked into inflation/deflation port
when using the pump.
● Never leave pump unattended while the pump is in use.
● The supply cord cannot be replaced. If the cord is damaged, the appliance
should be scrapped.
3 TO INFLATE ITEMS
● Connect plug to 220-240v volt AC socket.
● Join adapter to inflation port. Then hold pump
against valve of inflatable item and switch on for
inflation/switch off for stop (the symbol "-" on the switch means "ON", "O"
means "OFF").
● The valve of inflatable item should not be obstructed, otherwise, it could
overheat and damage the pump.
● Never use the deflation vent when inflating the item.
● On large items like inflatable boat or king-size air mattress, the pump should
fit directly to the valve of inflatable item for fast inflation. Use the appropriate
adapter for small valve, such as single-size air mattress, etc.
4 TO DEFLATE ITEMS
● Open the valve of inflatable item.
● Join adapter to deflation port. Then insert it in the
valve and switch on for deflation/switch off for stop
(the symbol "-" on the switch means "ON", "O" means
"OFF").
● The valve of inflatable item should not be obstructed,
otherwise, it could overheat and damage the pump.
● For small valve of inflatable item, it may be pinched with your fingers to open
the flapper of valve and allow the air to escape.
● For quickly inflating the item with screw valve, unscrew the safe bolt, then
inflate directly with the pump. When finishing screw the safe bolt, then remove
the top of the safe bolt for fully inflating the item. For deflation, unscrew the
safe bolt to deflate directly.