Page 2
114-051 For questions regarding the operation or installation of this product, visit www.bradleycorp.com or call 1-800-BRADLEY. Product warranties may also be found under ”Product Information” on our web site at www.bradleycorp.com. 3/27/07 Bradley Corporation • 215-1474 Rev. C; EN 07-507...
Page 3
(406mm) (254mm) 53-1/4" (1352mm) 48" (1219mm) * NOTE: Use valve sub-assembly (Item 15) to mark and drill valve stem holes. 1-1/4" NPT INLET 12" 5-5/8" (305mm) (143mm) 36" (914mm) TO FLOOR Bradley Corporation • 215-1474 Rev. C; EN 07-507 3/27/07...
Page 4
Use teflon tape for sealing the showerhead. IMPORTANT: Do not rely on Bradley’s Combination Unit to support supply piping. 1. From the outside of the building, drill a 1" dia. hole in the wall 36" up from the ground floor for the eyewash piping.
Page 5
S19-310TW8, S19-310TW12, S19-310TW18 Assembly of Components NOTE: Use teflon tape only. P.O. BOX 309, MENOMONEE FALLS, WI 53052-0309 USA TEL: 1-800-BRADLEY FAX: (262-251-5817) http://www.bradleycorp.com 12.2 12.1 12.3 12.4 12.5 12.6 12.7 Bradley Corporation • 215-1474 Rev. C; EN 07-507 3/27/07...
Need help?
Do you have a question about the S19-310TW8 and is the answer not in the manual?
Questions and answers