Appendix B: Safety Precautions, Safeguards & Information; Safe Use And Installation Instructions - Onlogic PS1000-1 Product Manual

Symbols used:
5.2 Appendix B: Safety Precautions, Safeguards & Information
Do not open and modify the device! The device complies with various national and international
Safety, EMC and Environmental requirements per various standards.
Modification of the device may void certifications, warranty and/or cause possible injury to the user.

5.2.1 Safe use and installation instructions

1. Read the entire manual before using the product.
2. Install the device securely per users manual instructions.
3. Care must be taken handling the device to prevent injury to self or possibility of damaging the
unit.
4. The appliance is suitable for use together with ITE equipment only.
5. The appliance is suitable for moderate climates only.
6. The maximum ambient temperature during use of the appliance must not exceed 70°C.
7. Naked flame sources, such as candles, must not be placed on the appliance.
8. The appliance and the mains-socket must all times be easily accessible.
9. In case of broken cords or plugs the appliance must be disposed of.
10. The appliance does not require regular maintenance. If you want to clean it, please use only a
dry cloth or brush. Do not clean the device with liquids. To prevent injury to self and/or
damage to the device the unit must be powered down and all connecting power and other
peripherals shall be disconnected prior to cleaning.
11. This product is suitable for altitudes less than 5000m.
12. Wall or ceiling mounting device requires use of a mounting plate or bracket. The plate or
bracket must be of metal construction and have a minimum thickness of 1mm.
13. Use M3x0.5mm screws to attach mounting plate or mounting brackets to threaded holes on
bottom or rear of chassis. Screws should be a minimum length of 4mm. Add 1mm of screw
length for every mm of additional thickness of plate or bracket beyond 1.5mm.
14. Ambient operating temperature must be between -20 °C to 70 °C with a non-condensing
relative humidity of 10-90%.
15. The device can be stored at temperatures between -40 °C to 80 °C.
16. Keep the device away from liquids and flammable materials. Not to be installed in a
hazardous environment.
17. Allow adequate space around all sides of the device for proper cooling and to not exceed its
maximum operating temperature limit. Keep air vents unobstructed.
Indoor use only
The appliance shall not be disposed together with the
normal waste. It must be recycled.
18