Troubleshooting; Notice - Philips AQ1001 User Manual

7 Troubleshooting

Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
•
Ensure that the AC power plug of the unit
is connected properly.
•
Ensure that there is power at the AC
outlet.
•
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
• Replace the battery.
No sound
• Adjust the volume.
No response from the unit
• Take out the batteries and turn on the unit
again.
•
Disconnect and reconnect the AC power
plug, then turn on the unit again.

8 Notice

Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user's
authority to operate the equipment.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
EN
7