Important; Safety - Philips AQ1001 User Manual

1 Important

Safety

• Heed all warnings and follow all
instructions.
• Do not use the device near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce
heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the device.
• Only use attachments/accessories specified
by the manufacturer.
• Unplug the device during lightning storms
or when unused for long periods of time.
• Refer all servicing to qualified service
personnel. Servicing is required when the
device has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the device, the device has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
device:
• Incorrect use of batteries can cause
electrolyte leakage and will corrode
the compartment or cause the
batteries to burst.
• Old and new or different types of
batteries should not be combined.
• Install the battery correctly, + and - as
marked on the device.
EN
2
• Remove battery when the device is
not used for a long time.
• Batteries contain chemical substances,
so they should be disposed of properly.
• The device shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
the device (e.g. liquid filled objects, lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•
Never remove the casing of this device.
•
Never place this device on other electrical equipment.
•
Keep this device away from direct sunlight, naked
flames or heat.
•
To reduce the risk of fire or electric shock, do not
expose this device to rain or moisture.
•
Ensure that you always have easy access to the power
cord, plug, or adapter to disconnect this device from
the power.