Table of Contents
Advertisement
Mounting Instructions
Using the mounting bracket
:
;
;
;
Nut
Nylon Washer
Lock
Washer
,
Flat Washer
.
Nut
1. Choose
a mounting
location that
is suffi-
Choose the holes that give the most
ciently far from all heat and air conditioning
ducts
(especially the former).
Make sure
that the 350 can
be mounted
as level as
-
possible.
2. Using the upper bracket as a template, drill
four holes using
a 6mm or 1/4 inch drill as
shown in the illustration.
3. Attach the upper bracket to the dashboard
using the nuts, washers and 5 x 16 bolts as
shown in the illustration.
4. Using the four 5 x 10 bolts, washers and
nuts, attach the lower bracket to the upper
bracket as shown in the illustration. Choose
the rear holes on the upper
bracket
that
yields
the
most
Jevel
installation
of the
lower bracket.
Lower Bracket
5.
Place the 350 on the lower bracket and push
it in as far as it will go.
6. Tighten the two
dial knobs
on the lower
bracket to secure the 350.
7.
Make
the
appropriate
connections
as_in-
structed on page 4.
OYE OT"
Advertisement
Table of Contents
