Bosch SPS2HMI54Q Information For Use page 42

en Troubleshooting
Fault
All LEDs lit up or
flashing.
Remnants of food on
tableware.
42
Cause and troubleshooting
Electronics have detected a fault.
Press the main switch button for approx.
1.
4 seconds.
The appliance is reset and restarted.
If the problem occurs again:
2.
Switch off the appliance.
‒
Pull out the mains plug or switch off the fuse in
‒
the fuse box.
Wait at least 2 minutes.
‒
Switch on the fuse in the fuse box or insert the
‒
mains plug.
Switch the appliance on.
‒
If the problem occurs again:
3.
Contact customer service.
‒
→ "Customer Service", Page 47
Tableware is placed too close together or basket is
overfilled.
Arrange tableware with sufficient space in between.
1.
The spray jets must reach the surfaces of the table-
ware.
Avoid points of contact.
2.
Spray arm rotation of the lower spray arm is blocked.
Arrange tableware so that it does not obstruct
▶
spray arm rotation.
Spray arm nozzles are blocked.
Clean the Spray arms → Page 38.
▶
Filters are soiled.
Clean the filters.
▶
→ "Cleaning filters", Page 37
Filters are inserted incorrectly and/or not engaged.
Insert the filters properly.
1.
→ "Filter system", Page 37
Engage the filters.
2.
Washing programme selected too weak.