Table of Contents
Advertisement
Sync control
You can use Sync control to operate and control the two elements on the left
side simultaneously, as a single cooking zone, and then use the zone for large
cookware. (Examples : oval cookware, large spagetthi pots, etc.)
0
0
0
0
0
0
0
0
4
0
4
0
4
0
1. Tap Sync control.
• The two left elements are synced and
will set to level 0.
2. Set the level you want.
• Synced burner will now work
together.
3. To disable Sync control, Tap Sync control.
• The two left elements are desynced
and set to level you currently set.
Before using the cooktop
Use quality cookware in good condition
Also remember to
• Use cookware made with the correct material for induction cooking.
See 'Cookware for induction cooking zones' on page 26.
• Use quality cookware with heavier bottoms for better heat distribution allowing
for more even cooking results.
• The pan size should match the amount of food being prepared.
• Do not let pans boil dry. This may cause permanent damage in the form of
breakage, fusion, or marring that can affect the ceramic cooktop. (This type of
damage is not covered by your warranty.)
• Do not use dirty pans with grease buildup. Always use pans that are easy to
clean after cooking.
CAUTION
• The Cooking Zones may appear to be COOL while turned ON and after they
have been turned OFF. The glass surface may be HOT from residual heat
transferred from the cookware and burns may occur.
• DO NOT TOUCH HOT COOKWARE or PANS directly with your hands. Always use
oven mitts or pot holders to protect your hands from burns.
• DO NOT SLIDE cookware across the cooktop surface. Doing so may permanently
damage the appearance of the ceramic cooktop.
The cookware used with the cooktop
surface should have flat bottoms that make
good contact with the entire surface of the
Cooking Zone. Check for flatness by rotating
a ruler across the bottom of the cookware.
Be sure to follow all the recommendations
for using cookware.
English 25
Advertisement
Table of Contents
