MACALLY BTNUMKEY - Rechargeable Bluetooth Numeric Keypad Manual

Package Contents

• BTNUMKEY
• USB charging cable
• User's Guide

System Requirements / Technical Support

• Any Mac or PC computer with a Bluetooth host
• Mac OS X v10.6 to Mac OS X v10.12 and above
• Windows 7/8/10
• iPhone/iPad and Android mobile device

Technical Support

Please E-mail us at techsupport@macally.com, or call us at
1-909-230-6888 Monday to Friday, 8:30AM to 5:30PM, Pacific Standard Time

FAQ & help - https://help.macally.com/help

Hardware Basics

Before you begin using this product, be sure to read this user's guide in its entirety.

Pairing keys: Before first time use, press and release the enter and backspace keys, once and simultaneously. Pairing LED flashes blue.

1. Charging indicator LED:
   Battery charging - red on;
   Charged full - off.
2. Pairing indicator LED: flashing blue.
3. Windows Num Lock indicator LED:
   Num Lock on & typing - blue on;
   Num Lock off - off.

Pairing the keypad with Mac

1. Make sure the keypad is on and fully charged. Then press and release the "enter and backspace" keys simultaneously to set the keypad into pairing mode (flashing blue LED).
   
2. Click on the Bluetooth icon located in the upper right corner of your Mac's menu bar. Make sure Bluetooth is "ON" then select "Open Bluetooth Preferences" from the drop down menu.
   
3. From the Bluetooth screen, wait for the Macally Bluetooth Keypad to show up then click on "Pair" or "connect" to add it. NOTE: It may take up to a minute for the device to show up on the screen.
   
   
4. Once pairing is completed the Bluetooth keypad will show "Connected". If you are having issues connecting, try turning Bluetooth off then turn on and try re-pairing the keypad again.
   

Pairing the keypad with Windows PC

1. Make sure the keypad is on and fully charged. Then press and release the "enter and backspace" keys simultaneously to set the keypad into pairing mode (flashing blue LED).
2. Open your windows Bluetooth settings and click on "Add a device".
   
3. From the Bluetooth screen, wait for the Macally Bluetooth Keypad to show up then double click on it to add it.
   NOTE: It may take up to a minute for the device to show up on the screen.
   
4. After a short period, Windows will show the following screen indicating that the keypad is now paired with the computer. Please note that the driver installation may take a few minutes. Windows will notify you when the keypad is ready to use.
   
   Please note that if you are using a different Windows OS version, your screen may differ from the above diagrams.

Pairing the keypad with iPad and iPhone

1. To connect the Bluetooth keypad to your iPad or iPhone, bring them together within 1ft range.
2. Then turn on the keypad, press and hold down both "enter" and "backspace" key simultaneously, pairing light flashes blue to indicate the keypad is in pairing mode.
3. In your iPad or iPhone, go to Settings, select Bluetooth, under OTHER DEVICES, find and tap on the Macally keypad to connect.
4. Once the keypad appears as "Connected" in Bluetooth, you are ready to use it.

Pairing the keypad with Android device

1. To connect the Bluetooth keypad to your Android device, bring them together within 1ft range.
2. Then turn on the keypad, press and hold down both "enter" and "backspace" key simultaneously, pairing light flashes blue to indicate the keypad is in pairing mode.
3. In your Android device, go to Settings, select Connected devices, make sure Bluetooth is on, tap to open Bluetooth, tap on Pair new devices, and tap to select the discovered Macally keypad to pair.
4. Once the keypad appears Connected in the list, you are ready to use it.

Documents / Resources

References

• HELP

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download MACALLY BTNUMKEY - Rechargeable Bluetooth Numeric Keypad Manual