Using The Remote Control; Magic Remote - LG MAGNIT All-in-One LAAA007-G2 Owner's Manual

Led screen
Hide thumbs Also See for MAGNIT All-in-One LAAA007-G2:
Table of Contents

Advertisement

24

USING THE REMOTE CONTROL

MAGIC REMOTE

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully
to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AA) matching
terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the
installation actions in reverse. The illustrations may differ from the actual accessories.
CAUTION
Use the remote control within the specified range (within 10 m).
You may experience communication failures when using the device outside the coverage area or if there are obstacles
within the coverage area.
You may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic
Remote. This may cause communication failures.
The Magic Remote may not work properly if a wireless router (AP) is within 0.2 m of the monitor/LED Screen. Your
wireless router should be more than 0.2 m away from the monitor/LED Screen.
Do not disassemble or heat the batteries.
Do not drop the battery. Avoid extreme shocks to the battery.
Do not immerse the batteries in water.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type
Properly dispose of used batteries.
Inserting a battery in the wrong way may result in explosion.
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magnit all-in-one laaa015-g2

Table of Contents