Honda Accord Sedan 2020 Owner's Manual page 637

uuReplacing Light BulbsuHeadlight Bulbs
■
High Beam Headlights
Models with halogen high beam headlights
Holding clip
Hose
Coupler
Tab
Bulb
■
Low Beam Headlights
Low beam headlights are LED type. Have an authorized Honda dealer inspect and
replace the light assembly.
636
Passenger side
1. Remove the hose and the holding clip using
a flat-tip screwdriver, then remove the
upper part of the window washer reserve
tank.
Check the amount of window washer
u
fluid is below the upper part of the
window washer reserve tank and remove
it.
Both sides
2. Push the tab to remove the coupler.
3. Rotate the old bulb counter-clockwise to
remove.
4. Insert a new bulb into the headlight
assembly and turn it clockwise.
5. Insert the coupler into the connector of the
bulb.
1High Beam Headlights
Models with LED high beam headlights
High beam headlights are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
Push until the pin
is flat.