Table of Contents
Advertisement
The SensiCare detection is carried out
with complete washing programmes only
and if the programme duration has not
been reduced by means of the Time
Manager button.
The SensiCare System is not available
with all programmes such as :Wool,
Rinse and programmes with short cycles.
11.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pause
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to activate
the appliance.
If the SensiCare System has completed
and the water filling has already started,
the new programme starts without
repeating the SensiCare System. The
water and the detergent are not drained
out in order to avoid waste. The display
shows the maximum duration of the
programme, updating it about 20 minutes
after the starting of the new programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position
.
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
11.11 Opening the lid - Adding
garments
If the temperature and level of the water
in the drum are too high and/or the drum
is still rotating you should not open the
lid.
While a programme or the delay start
operates, the appliance lid is locked. The
display shows the indicator
1. Touch the Start/Pause
In the display the related lid lock indicator
goes off.
2. Open the appliance lid and drum doors. If
button.
The programme or the delay start continues.
11.12 End of the programme
again.
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Start/Pause
goes off.
The lid unlocks and the indicator
off.
1. Press button On/Off to deactivate the
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance again,
the display shows the end of the previous
programme. Turn the programme dial to
set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the lid and the detergent dispenser
5. Close the water tap.
necessary, add or remove the items.
Close the drum door and lid. Touch the
Start/Pause
button.
appliance.
slightly ajar to prevent mildew and
odours.
.
button.
button
goes
ENGLISH
25
Advertisement
Table of Contents
