Disassembly/Reassembly - Panasonic TOUGHBOOK CF-19FHGAX M Series Service Manual

9 Disassembly/Reassembly

Note:
Power off the computer. Do not shut down to the Suspend or hibernation mode.
Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.
9.1. Disassembly Instructions
9.1.1. Preparation
Before disassembling, be sure to make the following prepara-
tions.
ï Shut down Windows and turn off the power.
ï Disconnect the AC adaptor.
ï Remove the optional DIMM memory card and PCMCIA card
if they are connected.
ï Remove other devices if they are connected.
Attention:
ï Please execute writing BIOS ID when you exchange the
Main Board.
ï Parts (Sheet and rubber) etc. related various the Conductive
Cloth and Heat Spreader cannot be recycled. Use new parts.
9.1.2. Removing the Battery Pack and
HDD Pack
1
2
Battery Pack
1. Open the Battery Cover.
2. Remove the Battery Pack.
3. Open the HDD Cover.
4. Remove the HDD Pack.
HDD FPC
5. Remove the two Screws <N13>.
6. Remove the HDD Case A and the HDD Case B.
7. Remove the HDD
3
Screws <N13> : DXQT2+D4FNL
9.1.3.
HDD Pack
1. Remove the Palm Rest Ass'y.
2. Remove the 4 Screws <N9>.
3. Remove the KBD Plate.
23 / 90
HDD Case B
Hooks
HDD
Heater
<N13>
<N13>
HDD Case A
Removing the Touch Pad and Key-
board
KBD Plate
<N9>
<N9>
Palm Rest Ass'y
Note:
The Palm Rest Ass'y is firmly fixed with two-sided
tape.
Carefully remove the Palm Top Cover Sheet not to
damage it.
Hooks
KBD Plate
<N9>
<N9>