Mitsubishi Electric CITY MULTI PEFY-WP40VMA-E Technical & Service Manual page 9

[ II Components and Functions ]
(2) Remote Controller Display
The main display can be displayed in two different modes: "Full" and "Basic."
The factory setting is "Full." To switch to the "Basic" mode, change the setting on the "Main display" setting screen (Main menu > Initial setting >
Main display).
▌ Full mode
* All icons are displayed for explanation.
⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱
⑥
⑦
⑧
Room
⑨
⑩
Cool Set temp.
①
⑪
Mode
㉑
▌① Operation mode
Indoor unit operation mode appears here.
▌② Set temperature
Set temperature appears here.
▌③ Clock
Current time appears here.
▌④ Fan speed
Fan speed setting appears here.
▌⑤ Button function guide
Functions of the corresponding buttons appear here.
▌⑥
Appears when the ON/OFF operation is centrally controlled.
▌⑦
Appears when the operation mode is centrally controlled.
▌⑧
Appears when the set temperature is centrally controlled.
▌⑨
▌⑩
▌⑪ Room temperature
Current room temperature appears here.
▌⑫
Appears when the buttons are locked.
▌⑬
Appears when the On/Off timer, Night setback, or Auto-off timer function is
enabled.
appears when the timer is disabled by the centralized control system.
▌⑭
Appears when the Weekly timer is enabled.
HWE1114B
Fri
Auto
Temp. Fan
②
⑤
▌ Basic mode
③
⑲
Cool
⑳
①
④
Mode
▌⑮
Appears while the units are operated in the energy-save mode. (Will not
appear on some models of indoor units)
▌⑯
Appears while the outdoor units are operated in the silent mode.
▌⑰
Appears when the built-in thermistor on the remote controller is activated to
monitor the room temperature ( ⑪ ).
appears when the thermistor on the indoor unit is activated to monitor the
room temperature.
▌⑱
Indicates the vane setting.
▌⑲
Indicates the louver setting.
▌⑳
Indicates the ventilation setting.
▌㉑
Appears when the set temperature range is restricted.
Most settings (except ON/OFF, mode, fan speed, temperature) can
be made from the Main menu.
- 4 -
②
Fri
Set temp. Auto
Temp. Fan
⑤
③
④
GB