Table of Contents
Advertisement
•
Press the cooler button once.
•
When you first push this button,
the last value will appear on the
cooler setting indicator.
•
Whenever you press this but-
ton, a lower temperature will be
set. (+8 °C, +6 °C, +5 °C, +4
°C, +2 °C, super cool)
•
When you push the cooler set
button until the super cool sym-
bol appears, and if you do not
push any button within 1 sec-
ond, super cool will flash.
•
If you continue to press the but-
ton, it will restart from +8 °C.
•
The temperature value select-
ed before holiday mode, super
freeze mode, super cool mode
or economy mode is activated
and will remain the same when
the mode is over or cancelled.
The appliance continues to op-
erate with this temperature val-
ue.
Stand-By Mode
Purpose
This mode can be used to save en-
ergy when you go on vacation.
How Would It Be Used?
•
Select "8" set value.
•
Push mode and cooler Set But-
ton for 5 seconds.
•
Display will show "St" "bY" on
the screen.
During This Mode
•
In stand-by mode; all compo-
nents will be disabled.
•
If you push the display button,
display will show "St" "bY" on
the screen to show stand-by
mode is active.
•
To cancel; push mode and cool-
er set button for 5 seconds.
•
After the mode is deactivated,
an error code may light on the
display because the product
maybe not cool enough. The er-
ror code will turn off when the
product reaches normal tem-
perature.
Temperature Settings Warnings
•
Your appliance is designed to
operate in the ambient tem-
perature ranges stated in the
standards,
climate class stated in the in-
formation label. It is not rec-
ommended that your fridge is
operated in the environments
which are outside of the stated
temperature ranges. This will
reduce the cooling efficiency of
the appliance.
•
Temperature
should be made according to
the frequency of door openings,
the quantity of food kept inside
the appliance and the ambient
temperature in the location of
your appliance.
•
When the appliance is first
switched on, allow it to run for
24 hours in order to reach oper-
ating temperature. During this
time, do not open the door and
do not keep a large quantity of
food inside
•
A 5 minute delay function is ap-
plied to prevent damage to the
compressor of your appliance
when connecting or disconnect-
ing to mains, or when an energy
breakdown occurs. Your appli-
ance will begin to operate nor-
mally after 5 minutes.
Door Open Alarm Function
If fridge door is opened more than
2 minutes, appliance sounds 'beep
beep'.
- 17 -
according
to
adjustments
the
Advertisement
Table of Contents
