Table of Contents
Advertisement
Wall Mount Kit Specifications (VESA)
― Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount
kits contain a detailed installation manual and all parts necessary for assembly are provided.
•
Do not use screws that are longer than the standard length or do not comply with the VESA
standard screw specifications. Screws that are too long may cause damage to the inside of the
product.
•
For wall mounts that do not comply with the VESA standard screw specifications, the length of
the screws may differ depending on the wall mount specifications.
•
Do not fasten the screws too firmly. This may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
•
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified
wall mount is used or the consumer fails to follow the product installation instructions.
•
Do not mount the product at more than a 15 degree tilt.
•
Standard dimensions for wall mount kits are shown in the table below.
•
This apparatus is intended to be supported by UL listed Wall Mount Bracket.
•
Only supports horizontal orientation, does not support left and right rotation
Wall mount bracket
Model name
VESA screw hole specs
(A * B) in millimeters
S24C33"
75.0 x 75.0
S27C33"
― Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
Product
C
C
Standard Screw
12.0 mm
4.0 mmΦ,
1.2 cm
0.7 pitch*12.0 mm
length
Quantity
4
12
Advertisement
Table of Contents
