Section Seven Setting Function - TECPEL CL-420B Manual

+LOOP

Section Seven Setting Function

Fulfilling of the following operation will change the
auto-power-off function of the Instrument:
In power-off state, press the keys〔mA%/V〕and
〔power〕simultaneously to power on, and release the
〔 mA%/V 〕 key only after the LCD displays all the
contents. The Instrument enters into the calibration mode,
and the symbols 'AP -XX 'appear in the LCD;
Press the key 〔〕 / 〔〕 , and when the LCD displays
'AP- OF ', the Instrument removes auto-power-off
function; And when the LCD displays 'AP- ON ', the
Instrument recovers the auto-power-off function.
Press the key 〔100%/START〕 to store the selection;
Cut off the power again to exit from the maintenance
function.
INPUT
V
MAX MAX
30V 30V
+mA- XMT
+
Transmitter
mA
COM
MAX
30V
OUTPUT
https://tecpel.com
- 10 -