Table of Contents
Advertisement
16. Remote and
Accessories
16.1. Bluetooth® On or Off
Pair Accessory
Position the Bluetooth® device within a distance of 5
meters from the TV. Read the user manual of the device
for specific information on pairing and on wireless range.
Make sure the Bluetooth® setting on TV is switched on.
Once a Bluetooth® device is paired, you can select it to
play the TV sound. When a device is paired, you do not
need to pair it again unless you remove the device.
To pair a Bluetooth® device with the TV:
1 - Switch on the Bluetooth® device and place it within
range of the TV.
2 - Select Settings > Remote & accessories > Pair
accessory.
3 - Select Search and press OK. Follow the instructions
on screen. You will pair the device with the TV and the
TV will store the connection. You might need to unpair a
paired device first if the maximum number of paired
devices was reached.
4 - Press (left) repeatedly if necessary, to close the
menu.
Device Operation
To connect or disconnect a Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Connect or Disconnect to connect or
disconnect a Bluetooth® device.
4 - Press (left) repeatedly if necessary, to close the
menu.
To rename a Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Rename to rename a Bluetooth® device.
4 - Press (left) repeatedly if necessary, to close the
menu.
You can connect or disconnect a wireless Bluetooth®
device. You can also remove a Bluetooth® device further.
If you remove a Bluetooth® device, the device will be
unpaired.
To remove Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Forget to remove the Bluetooth® device.
4 - Press (left) repeatedly if necessary, to close the
menu.
To view the information of Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - The information of Bluetooth® device is listed on the
bottom.
4 - Press (left) repeatedly if necessary, to close the
menu.
16.2. Remote Control
Pair Remote Control
Pairing or pairing again
When you start the initial TV installation, the TV invites
you to press the Home + Back key to pair the remote
control. If the pairing with the remote control was lost,
you can pair it again by pressing the Home + Back key.
Alternatively, go to Settings > Remote &
accessories > Remote control settings > Pair remote
control, then follow the on-screen instructions.
A message appears when the pairing is successful.
Remote Control Info
View the remote control information
Settings > Remote & accessories > Remote control
settings > Remote control info.
You can select Version to check the embedded software
version of remote control or select Battery level to see
current battery percentage.
Update Remote Control Software
Update remote control software
Settings > Remote & accessories > Remote control
settings > Update remote control software.
Check available remote control software for updates. If a
new software update is available for your remote
control, you can start the software update. Please install
new batteries or fully charge the battery, and then
position your remote control within one meter from TV
for updating software.
58
Advertisement
Table of Contents
