Table of Contents
Advertisement
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB flash drive.
Automatic Software Update
To switch on Automatic software update to update your
TV software automatically. Leave the TV in standby.
1 - Select Settings > System > About > System update
> Automatic Software Update.
2 - Follow the on-screen instruction.
3 - Press (left) repeatedly if necessary, to close the
menu.
When the setting is enabled, the upgrade gets
downloaded when the TV is powered ON and installed
15min after the TV has gone to standby (as long as there
are no alarms scheduled).
When the setting is disabled, the "Upgrade Now" /
"Later" OSD will be shown.
View Software Update History
Display the list of software versions that are successfully
update on the TV.
To view the software update history:
1 - Select Settings > System > About > System update
> View software update history.
2 - The software update history on this TV will be listed.
Reset
Rinstall TV
Settings > System > About > Reset > Factory reset.
Reset and redo the complete TV installation.
Reset all settings value to original TV settings
Settings > System > About > Reset > Factory settings.
Reset all settings to factory settings.
Status
Display TV status information
Settings > System > About > Status.
To display the TV status about IP address, Device, MAC
address, Bluetooth® address, Serial Number, etc.
Legal Information
Open Source Software
This television contains open source software. TP Vision
Europe B.V. hereby offers to deliver, upon request, a copy
of the complete corresponding source code for the
copyrighted open source software packages used in this
product for which such offer is requested by the
respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to...
open.source@tpv-tech.com
Open Source License
About Open Source License
README for the source code of the parts of TP Vision
Europe B.V. TV software that fall under open source
licenses.
This is a document describing the distribution of the
source code used on the TP Vision Europe B.V. TV, which
fall either under the GNU General Public License (the
GPL), or the GNU Lesser General Public License (the
LGPL), or any other open source license. Instructions to
obtain copies of this software can be found in the
Directions For Use.
TP Vision Europe B.V. MAKES NO WARRANTIES
WHATSOEVER, EITHER EXPRESS OR IMPLIED, INCLUDING
ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. TP Vision Europe B.V. offers no support for
this software. The preceding does not affect your
warranties and statutory rights regarding any TP Vision
Europe B.V. product(s) you purchased. It only applies to
this source code made available to you.
System Information
To view the current TV software version:
1 - Select Settings > System > About > Model,
Android TV OS version, Android security patch level,
Kernel version, Android TV OS build, SW version,
Netflix ESN, Nagra device ID.
2 - The version, release notes and creation date are
shown. Also, the Netflix ESN Number and other
information are shown if available.
3 - Press (left) repeatedly if necessary, to close the
menu.
54
Advertisement
Table of Contents
