Samsung Odyssey G7 S27BG65 Series User Manual page 11

S28BG70* / S32BG70*
1
Place the stand neck on
the monitor as shown in
the figure.
5
Assemble the COVER-
REAR TOP to the stand
neck as shown in the
figure.
8
After installing the
stand, place the product
upright.
x 4
2
Fasten the screws at the
top of the stand neck.
6
Rotate the COVER-REAR TOP clockwise.
Caution
Do not arbitrarily remove
the panel film. If not
observed, the warranty
service may be restricted.
3
Insert the stand base
into the stand neck in the
direction as shown in the
figure.
- 11 -
4
Disassemble the COVER-
REAR TOP.
7
Stand up the monitor as
shown in the figure.