Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Settings - Bosch WGG244FAES User Manual And Installation Instructions

Table of Contents

Advertisement

en Basic operation
¡ Do not use products containing
solvents, caustic agents or volatile
substances
¡ Do not use chlorine bleach
¡ Do not use dyes regularly as fixing
salt can damage stainless steel
¡ Do not use color-bleaching agents
in the appliance
¡ Do not pour vinegar into the dis-
pensers → Page 32 of the intelli-
gent dosing system

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Turn the programme selector to a
programme.
a An audible function test is carried
out.
Note: The lighting for the drum goes
out automatically.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 25
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 30
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 30
30
Adjust the programme settings.
→ "Buttons", Page 23
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
13.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 25
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 29
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Starting the programme
Note: If the intelligent dosing system
is activated, make sure that the dis-
pensers have been filled → Page 32
and the basic dosage has been set
→ Page 33.
Requirement: A programme is set.
→ "Setting a programme", Page 30
Press
⁠   Inicio/Pausa + Carga.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".

Advertisement

Table of Contents
loading

Table of Contents