Table of Contents
Advertisement
en Installation and connection
Sensor set-
ting
SE:00
SE:01
SE:02
12
Description
Optimum setting for
a mixed load and
heavily soiled table-
ware. Saves both en-
ergy and water.
Adjusts the pro-
gramme strength for
effective removal of
food remnants even
with low soiling
levels. Energy and
water consumption
are adjusted accord-
ingly.
Adjusts the pro-
gramme strength for
difficult conditions of
use, e.g. stubborn
dried-on food rem-
nants. Recommen-
ded setting when us-
ing organic or ecolo-
gical detergents con-
taining low levels of
active agents. En-
ergy and water con-
sumption are adjus-
ted accordingly.
Installation and connection
4 Installation and con-
nection
To ensure proper operation, connect
Installation and connection
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
4.1 Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Operating instructions
¡ Installation Instructions
¡ Further information documents
¡ Installation material
¡ Steam protection
¡ Salt filling aid funnel
¡ Mains cable
¡ Quick reference guide
4.2 Installing and connecting
the appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
Advertisement
Table of Contents
