Table of Contents
Advertisement
micro-organism and particles. The addition of
vapour together with an additional rinsing
phase ensures a proper removal of detergent
residues and pollens/allergenic items, making
it suitable for delicate and sensitive skins.
8.4 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly soiled,
it may be advisable to shorten the washing
programme. Touch this button once to
decrease the duration.
• In case of smaller load, touch this button
twice to set an extra quick programme.
The display shows the indicator
This option can also be used to shorten
the Steam programme duration.
8.5 Temperature
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Set this option to change the default
temperature.
The indicator
= cold water of the set
temperature comes on (the appliance does
not heat the water).
8.6 Spin
When you set a programme, the appliance
automatically selects the maximum spin
speed. The display shows only the spin
speeds available for the set programme.
Touch this button repeatedly to:
• Decrease the spin speed.
• Activate the Rinse Hold option .
The water of the last rinse is not drained
out to prevent the fabrics from creasing.
The washing programme ends with water
in the drum and the final spin phase is not
performed.
The display shows the indicator
18
ENGLISH
The lid stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the lid.
Touch Start/Pause button: the appliance
performs the spinning phase and drains
the water.
• Activate the Extra Silent option.
All spinning phases (intermediate spin and
final spin) are suppressed and the
programme ends with water in the drum.
This helps to reduce creasing.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available. In
some programmes the rinses are
performed with more water.
The display shows the indicator
.
The lid stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the lid.
Touch the Start/Pause button: the
appliance performs only the draining
phase.
The appliance empties the water out
automatically after approximately 18
hours.
• Activate the Only Drain
(Skipping the wash, rinse and spin
phases) .
The appliance performs the only draining
phase of the selected washing
programme.
The display shows the indicator
(cold), and the indicator
and the indicator
• Activate the Only Spin
(Skipping the wash and rinse phases) .
The appliance performs only the spinning
phase of the selected washing
programme.
The display shows the indicator
(cold), the phase indicator the spin speed.
If it is necessary to reduce the spin
.
speed, select a programme with a
lower spin speed as default.
.
option
(no spin)
.
option
Advertisement
Table of Contents
