Sony HVR-Z7N Service Manual page 302

Soldering (1)
FP-031 flexible board
FP-031 flexible board
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
Lead-free solder
Wire type
Temperature of the : 320 ° C
soldering iron tip
Soldering at the
Contacting time of : within 2 sec.
two locations
• Be careful not to create the hollow
Screw
soldering, bridge formation, and the
M1.2 × 1.5
( )
holder's claw must not be melt.
• Be careful not to damage the terminal
due to attaching the soldering iron tip
too long time.
Motor holder block
ass'y
LED (D902)
Soldering at
2 locations
∅
: 0.6
Use the rubber finger tip cover.
Lead-free solder
Wire type
Soldering iron
Soldering iron tip : T1-1BC
Soldering iron tip temperature
Soldering iron tip contacting time: within 2 sec.
Be careful not to create the hollow soldering,
Br, and the holder's claw must not be melt.
Use the rubber finger tip cover.
Lead-free solder
∅
Wire type : 0.6
Soldering iron : 941 made by Hakko Mfg.
Soldering iron tip: T1-1BC
temperature: 300 ± 10 ° C
Soldering iron tip
Soldering iron tip contacting time within
2 sec.
FP-031 flexible board
MIC cover
FP-031 flexible board
MIC terminal
(MIC903)
Soldering at the
five locations
∅
: 0.6
: 941 made by Hakko Mfg.
: 300 ± 10 ° C
Direction of the
terminal is specified.
LED (D902)
HELP