Sony HVR-Z7N Service Manual page 268

3-3. Cassette Compartment Ass'y
1. Removal procedure
1) Enter the [EJ] mode.
2) Remove the three screws (special head screw M1.4 × 1.4) 1.
3) While pushing the frame of the cassette compartment ass'y
toward inside, remove the shaft 2 inside the LS frame from
the groove A of the LS chassis in the direction of the arrow
B.
4) Remove the shaft 3 inside the LS frame from the groove C
of the LS chassis.
5) Remove the cassette compartment ass'y shafts 4 and 5 from
the LS chassis grooves D and E. Remove the cassette com-
partment ass'y 6.
Frame
Cassette compartment
ass'y
LS chassis groove A
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
Cassette compartment
ass'y
B
2 Shaft (inside the LS
frame)
2. Attachment procedure
1) Enter the [ULE] mode.
2) Install cassette compartment ass'y 6 shafts 5 and 4 into
the LS chassis grooves E and D.
3) While pushing the LS frame inward, install the shafts 3 and
2 inside the LS frame into the grooves C and A of the LS
chassis.
4) Install the three screws (special head screw M1.4 × 1.4) 1 in
the order of F, G and H.
Tightening torque: 0.06 ± 0.01 N•m (0.61 ± 0.1 kgf•cm)
4 Shaft (of cassette
compartment ass'y)
F
G
1
Three screws
×
(M1.4 4)
LS chassis groove E
LS chassis groove C
6-84
Points to be noted
After completing the repair work ,clean
this side of the cassette compartment
ass'y,
6 Cassette compartment ass'y
5 Shaft (of cassette
compartment ass'y)
H
3 Shaft (inside
the LS frame)
LS chassis groove D