Change The Power Settings; Transfer Data - Lenovo 21JT003PUS User Manual

Use P-to-P 2.0 (Peer to Peer 2.0) charging function
Both USB-C (Thunderbolt 4) connectors on the computer feature the Lenovo-unique P-to-P 2.0 charging
function. To use the function, ensure that Always On USB and Charge in Battery Mode are enabled in UEFI
BIOS of your computers, so that the function works even when the computers are off or in hibernation mode.
To enable Always On USB and Charge in Battery Mode:
1. Press F1 to enter the UEFI BIOS menu.
2. Click Config ➙ USB, and then to enable Always On USB and Charge in Battery Mode.
Note: The actual charging speed of your computer depends on many factors, such as the remaining battery
power of the computers, the wattage of the ac power adapter, and whether you are using the computers.

Change the power settings

®
For ENERGY STAR compliant computers, the following power plan takes effect by default when your
computer is on ac power and has been idle for a specified duration:
• For models with Windows 10
– Turn off the display: After 10 minutes
– Put the computer to sleep: After 10 minutes
• For models with Windows 11
– Turn off the display: After 5 minutes
– Put the computer to sleep: After 5 minutes
To reset the power plan:
1. Go to Control Panel and view by Large icons or Small icons.
2. Click Power Options.
3. Choose or customize a power plan of your preference.
To reset the power button function:
1. Go to Control Panel and view by Large icons or Small icons.
2. Click Power Options, and then click Choose what the power buttons do on the left pane.
3. Change the settings as you prefer.

Transfer data

Quickly share your files using the built-in Bluetooth technology among devices with the same features.
.
Chapter 3 Explore your computer
27