Vizio Remote Control - Vizio VW22L User Manual

®
VIZIO VW22L HDTV10T User Manual

1.5 VIZIO Remote Control

REMOTE LED – Blinks when the remote operates.
POWER – Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
NUMBER BUTTON PAD – Use these buttons to select a channel or enter
a password.
INPUT – This button allows the user to select the video input signal source.
- (Dash) – Use this button for the separation (-) of main and sub-channels
when selecting a digital channel directly. For example, channel 28-2 would
be selected by the following button sequence: 2, 8, (–), 2.
CH (+ or -) – These buttons change the channels up or down.
VOL (+ or -) – Press to increase (+) or decrease (-) the volume.
LAST – This button recalls the previously viewed channel.
MUTE – This button turns the sound on and off. VOL (+ or -) – These
buttons turn the volume up or down.
MENU – Use this button to access the On-Screen Display (OSD) menus.
INFO – This button displays the image and system information display.
GUIDE – This button has no effect because this function is not available on
this HDTV.
EXIT – This button exits the On-Screen Display (OSD) menus.
- These buttons navigate the On-Screen Display (OSD).
OK – Use this button to select your chosen option in On-Screen Display
(OSD) menus.
Version 7/14/2008 11
www.VIZIO.com