Table of Contents

Advertisement

Setting up

1 Connect the speaker cables to the player
1
Cables from the left-hand speaker connect to the terminal
marked L (left) + (plus) and - (minus). Cables from the right-
hand speaker are connected to the terminal marked R (right)
+ (plus) and - (minus).
To connect the cable to the player, press each of the four
square plastic finger pads on the rear of the player.
The connector will open ready to receive a cable.
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
*speaker duct : A holl for plentiful bass sound on speaker cabinet(enclosure).
6
Put the battery in the remote control
Make sure that the + (plus) and - (minus) on the battery
(size AAA) match those on the remote control
2 Fit the AM loop aerial to its stand
2
Connect the AM loop aerial to the player.
3 Connect the FM aerial
3
The reception will be at its best when the two loose ends of the
aerial are in a straight line and horizontal.
4 Plug the power plug into a wall socket
4
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcs23f

Table of Contents