Liberty Furniture 272-BR-13FS Assembly Instruction

ITEM NO : 272 - BR13 / 14FS & 90RSP
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have
come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below :
2
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast and easy assembly.
!
WARNING !
1. Don't attempt to repair or modify parts that the broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
Led Touch Sensor :
i) Switch on
ii) Lighter
iii) More lighter
iv) Switch off
Adjust the support leg
into position, if necessary
LIBERTY FURNITURE
ASSEMBLY INSTRUCTION
DESCRIPTION : QUEEN STORAGE BED
TO REMOVE THE DRAWER
LEFT SIDE - PUSH TAB UP
HANDLE
HANDLE
SCREW
TO RE - ASSEMBLE HANDLE
FROM INSIDE DRAWER TO
OUTSIDE DRAWER
Assembly Tool
Not Included
All Hardware, pack in Footboard
TO INSTALL THE DRAWER
RIGHT SIDE -
PUSH TAB DOWN
LEFT SIDE - PUSH TAB UP
2
RIGHT SIDE -
PUSH TAB DOWN