Chapter 2 Connecting Equipment Chapter 2 Connecting Equipment; Which Video Connection Should I Use - Vizio VO32L User Manual

Chapter 2 Connecting Equipment Chapter 2
Chapter 2 Chapter 2

2.1 Which Video Connection Should I Use

2.1 2.1 2.1 Which Video Connection Should I Use? ? ? ? Which Video Connection Should I Use Which Video Connection Should I Use
The VIZIO VO32L HDTV10A has six different ways to connect your video equipment from a basic
connection to the most advanced for digital displays.
Connection
Quality (type)
Best
(digital)
Best
(digital)
- - - - - - - - - - - -
Good
(analog)
Best
(analog)
Better
(analog)
Good
(analog)
Note: For more info refer to the Quick Start Guide
Version 4/1/2008
Connecting Equipment
Connecting Equipment Connecting Equipment
Panel
Connector
Color
Codes
Yellow,
Orange
www.VIZIO.com
VIZIO VO32L HDTV10A User Manual
Rear
HDMI (High-Definition Multimedia Interface) - It is
the first and only industry-supported, uncompressed,
all-digital audio/video interface. HDMI provides an
White
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an
audio and/or video monitor, such as a digital
television (DTV), over a single cable.
DTV Coaxial RF. When used for MPEG2 encoded
bit streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
Black
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable.
RGB PC (VGA) – This video input has separate red,
green and blue color components.
Blue
carries horizontal and vertical sync information on
the green signal. This is most commonly used for
PC input.
Component1/2 - The video signal is separated into
three signals, one containing the black-and-white
Green
information and the other two containing the color
and
information. This enhancement over S-Video takes
Purple
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
S-Video (AV1) - The video signal is separated into
two signals, one containing the black-and-white
information and the other containing the color
information. Separating the color in this way avoids
'cross color' effects where closely spaced black and
white lines are erroneously displayed in color. It also
and
enables text to be displayed more sharply.
Red
Composite (AV1/2) - The complete video signal is
carried through this single pin connector. This is the
most commonly used video connection.
15
Description
The signal