Yamaha RMAX WOLVERINE 2021 Owner's Manual page 46

1
5
1. " " (off)
2. " " (on)
3. On position
To limit vehicle top speed
1. Turn the main switch to "
2. Remove the hood. (See page 9-9.)
3. Insert the system key into the Speed
Management System switch and turn it
to " ".
4. Remove the system key.
5. Install the hood.
6. Turn the main switch to "
2
TIP
The main switch must be turned to "
and then back to "
Management System changes are recog-
nized by the vehicle.
3
EWB04210
Before using the system key, stop the en-
gine.
Remove the system key immediately after
" (off).
use, otherwise the switch may change po-
sitions when driving over bumpy roads or
fall out and be lost.
5-15
confirm that the speed management icon
comes on. (See page 5-11.)
" (on) before Speed
WARNING
" (on) and
" (off)