Table of Contents
Advertisement
Controlling Audio
Speaker / X'over setup
1
Press the <EQ> button.
2
Touch [Speaker / X'over].
3
Touch the speaker to set up.
4
Set each item as follows.
[ON] : Filter adjustment.
Mode
[OFF] : Turns off the filter.
[OFF], [ON]
Set a crossover slope.
Slope
[R] [S]
• High Pass Filter adjustment. (When
Frequence
Front or Rear is selected)
[R] [S]
• Low Pass Filter adjustment. (When
Subwoofer is selected)
Adjust the gain of the front speaker,
Level
rear speaker, or subwoofer.
[R] [S]
Set the phase of subwoofer output.
Phase
[
] to shift the phase 180 degrees.
Inversion
(When Subwoofer is selected)
To clear the adjustment.
[INITIALIZE]
Listening Position DTA
1
Press the <EQ> button.
2
Touch [Position / DTA].
3
Touch [Delay].
4
Touch [T] or [U] to adjust the delay time of the
selected speaker.
5
Touch [Level].
6
Touch [T] or [U] to adjust the sound level of the
selected speaker.
Sound Effect
1
Press the <EQ> button.
2
Touch [Sound Effect].
3
Set each item as follows.
Set the amount of bass boost
Bass Boost
[OFF], [1], [2], [3]
Set the amount of boost of low
Loudness
and high tones.
[OFF], [ON]
To clear the adjustment.
[INITIALIZE]
English |
17
Advertisement
Table of Contents
