Programming Your Cable Or Satellite Set-Top Box; Searching For Device Codes; Reset Remote To Factory Settings - Vizio E420VL User Manual

Programming your Cable or Satellite Set-Top Box

1. Turn on the Cable or Satellite Set-Top Box.
2. Press and release the CABLE button on your VIZIO universal remote control.
3. Press and hold the SET button until the
LED flashes twice.
4. Find the programming code for your Cable
or Satellite Set-Top Box and enter it using
the number buttons. If the code is accepted,
the LED flashes twice after the last digit is
entered. If the LED does not flash twice,
repeat Steps 2 through 4 with the next code
listed.
5. Point the remote control at the Cable or
Satellite Set-Top Box and press POWER.
The Cable or Satellite Set-Top Box will turn
off. If the Cable or Satellite Set-Top Box
does not turn off, repeat Steps 2 through 4
with the next code listed for the component
and manufacturer.

Searching for Device Codes

If you cannot find the manufacturer in the list or the program code does not work, you can use the remote
control to search for the correct device code.
1. Turn on the device.
2. Press the matching device button on your VIZIO universal remote control.
3. Press and hold SET until the LED flashes twice.
4. Press 9 9 1. The LED flashes twice.
5. Point the remote control at the device and then press and hold POWER until the device turns off.

Reset Remote to Factory Settings

1. Press and hold SET until the LED flashes twice.
2. Press 9 1 9 1 9. The LED flashes twice.
Version 2/12/2010
VIZIO E420VL / E470VL / E550VL User Manual
DVD Player
Home Theater
Cable Box
Satellite Box
VCR
Other
Other
Other
47
www.VIZIO.com
My Codes