Page 2
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating.
Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should...
Page 4
• Use only with the cart, stand, tripod, bracket, or local power company. or table specified by the manufacturer, or sold • Do not apply pressure or throw objects at your TV. with the apparatus. When a cart is used, use This may compromise the integrity of the display.
Page 5
your TV, unplug the power cord and contact your dealer. • This apparatus shall not be exposed to dripping or Continuous use in this case may result in fire or electric splashing and no objects filled with liquids, such as vases, shock.
TeleVision anTenna ConneCTion lightning Protection ProTeCTion For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable If an outside antenna/satellite dish or cable system is to be system.
Table of Contents Installing the TV ..........3 Resetting the Color Temperature Settings ....... 23 Resetting the Picture Settings .......... 24 Inspecting the Package Contents ........3 Adjusting the Audio Settings ..........25 Installing the TV ..............4 Changing the Equalizer Settings ........26 Installing the TV Stand .............
Page 8
Resetting the Content Locks ..........38 Adjusting the CEC Settings ..........39 Turning the Power Indicator On or Off ......39 Using the Reset & Admin Menu .......... 40 Restoring the TV to Factory Default Settings ....40 Using the Guided Setup Menu ........40 Using Guided Setup ............
Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. Remote Control with Batteries VIZIO LED HDTV Quick Start Guide Power Cord 3 x M4 12mm 2 x M6 12mm...
insTalling The TV After removing the TV from the box and inspecting the package contents you can begin installing the TV. Your TV can be installed in two ways: • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) installing the TV stand Your TV includes a stand designed to support the weight of the...
Page 11
To install the base: 1. Align the neck piece with the bottom of the TV and slide the 3. Align the base with the neck and tighten three (3) M4 12mm flange into the body of the TV as shown. screws.
TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. e420-B1 Screw Size: Hole Pattern: 200mm (V) x 200mm (H) Weight w/o Stand: 22.05 lbs...
Controls and Connections ReaR Panel usB - Connect a USB thumb drive to display photos. hdmi - Connect an HDMI device. stereo audio out - Connect an RCA audio device, such as sound bar. hdmi - Connect an HDMI device. Coaxial - Connect coaxial cable from cable, satellite, or antenna.
FRont Panel remoTe sensor & PoWer indiCaTor When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on page 39.
Remote ContRol inPuT PoWer Change the currently-displayed input. Turn the TV on or off. a/V ConTrols info Control USB media player. Display the info window. Closed CaPTions menu Open the closed caption menu. Display the on-screen menu. exiT arroW Close the on-screen menu. Navigate the on-screen menu.
replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
Connecting Your devices ConneCting a deviCe Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). Cable/Satellite Box 2. Turn the TV and your device off. 3.
ConneCTing a deViCe - audio and Video CaBle TYPes AV CABLE COAXIAL CABLE AV cables (or Composite cables) are the traditional Coaxial cables are the traditional way of connecting way of connecting your devices to your TV. Video antennas and cable television signals to your TV. signals are sent over the yellow connector while audio Coaxial cables carry both audio and video signals is sent over the red and white connectors.
Page 20
COMPONENT CABLE HDMI CABLE Component cables are designed to carry high HDMI is the intelligent, all-digital interface that delivers definition video signals along with additional both dazzling quality and unmatched ease of use. HDMI audio connections. Colors are delivered with color technology transmits crystal-clear digital video along information split up three different ways over three with multi-channel surround audio.
2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar hdmi CaBle • CeC 2-WaY CommuniCaTion • 2.0-5.1 digiTal audio BesT •...
ConneCTing an audio deViCe - audio CaBle TYPes RCA CABLE OPTICAL/SPDIF CABLE HDMI CABLE AV cables (or Composite cables) are the Optical/SPDIF cables transmit audio signals as HDMI technology transmits crystal-clear digital traditional way of connecting your devices to pulses of light through a cable made of plastic multi-channel surround audio through a single your audio device.
ConneCTing an audio deViCe - arC Without hdmi arC With hdmi arC Built-in Tuner Built-in Tuner Your TV Your TV With an HDMI ARC setup, the audio connection between Without an HDMI ARC setup, your TV and home audio your TV will transmit audio receiver can be removed.
Completing the first-Time setup The first time you turn on the TV, the Setup App will guide you 4. Use the ok and arrow buttons on the remote to highlight through each of the steps necessary to get your TV ready for use. your time zone and press ok.
From this menu, you can: Use the arrow buttons to highlight • Adjust the Picture settings a menu option, and press the ok VIZIO button to select that option. • Adjust the Audio settings SETTINGS •...
Changing the inPut SouRCe Changing the SCReen aSPeCt Ratio External devices such as DVD players, Blu-ray Players, and video The TV can display images in five different modes: Normal, Stretch, game consoles can be connected to your TV. To use one of Panoramic, Wide, and Zoom.
To adjust the picture settings: adjust the setting: • auto Brightness Control - Detects the light levels in the 1. Press the menu button on the VIZIO room and automatically adjusts the backlight for the remote. The on-screen menu is PICTURE best picture.
Press the ok 1. From the PICTURE menu, use the button when you are finished. VIZIO arrow buttons on the remote to • Picture size - Increase or decrease the vertical and highlight advanced Picture, then ADVANCED PICTURE horizontal size of the displayed picture.
Adjusting the color temperature will change the white balance To reset the Color Temperature settings: of the picture. 1. From the COLOR TEMPERATURE To adjust the color temperature: VIZIO menu, use the arrow buttons to highlight reset Color 1. From the Picture Menu, use COLOR TEMPERATURE...
To reset the picture settings to the factory default settings: Reseting the picture mode only affects the settings for the currently-selected input, such as antenna or HDMI-1. 1. From the ADVANCED PICTURE VIZIO menu, use the arrow buttons to ADVANCED PICTURE highlight reset Picture mode, Wide...
• digital audio out - Changes the type of processing for 1. Press the menu button on the VIZIO HDMI ARC output when connected to a home theater remote. The on-screen menu audio system. Select PCm or Bitstream.
Changing the equalizer settings resetting the audio settings The graphic equalizer has several pre-set modes and allows you To reset the audio settings to the factory default settings: to create one custom mode. 1. Press the menu button on the remote. The on-screen menu is To select a pre-set audio mode: displayed.
Power off. 1. Press the menu button on the 2. Use the left/right arrow buttons on the remote to change VIZIO remote. The on-screen menu is whether the TV will turn off. If you don’t want the TV to turn off TIMERS displayed.
You can use the TV’s Tuner menu to: Antenna (Over-the-air) or Cable (Out-of-the-wall) connections. • Select a Tuner Input 1. From the TUNER menu, highlight Tuner mode and press ok. VIZIO • Perform an Auto Channel Scan The TUNER MODE menu displays. TUNER •...
To add a single new analog channel: Occasionally, you may need to add a new range of channels or 1. From the TUNER menu, highlight VIZIO add a new analog channel. You can do this by using the Partial add analog Channel and Channel Search and Add Analog Channel options.
See Locking and Unlocking Channels on page 37. To remove a channel: 1. From the TUNER menu, highlight VIZIO skip Channel, and press ok. SKIP CHANNEL The SKIP CHANNEL menu is Wide...
Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program being viewed is being broadcast with 1. From the Tuner menu, highlight VIZIO Secondary Audio Programming. digital language and press ok. The Digital Language menu DIGITAL LANGUAGE is displayed.
To change the appearance of digital closed captions: If the program you are viewing is not being broadcast 1. From the CLOSED CAPTIONS with closed captions, the TV will not display them. VIZIO menu, use the arrow buttons to highlight digital Closed DIGITAL CAPTION STYLE Captions style and press ok.
Page 39
• Background Color - Change the color of the Typical choices include: background directly behind the text. • Opaque background, transparent window—Only a strip • Background opacity - Change the transparency of the of background appears behind the text, expanding as background directly behind the text.
DVD player connected to the Component input, you can rename that input to display “DVD Player.” To change the name of an input: VIZIO 1. Press the menu button on the remote. The on-screen menu is NAME INPUT input name displayed.
Using the system menu, you can: 1. Press the menu button on the remote. The on-screen menu is • View system information displayed. VIZIO • Change the on-screen SYSTEM 2. Use the arrow buttons on the remote to highlight system...
TV’s time zone: To change the on-screen menu language: 1. Press the menu button on the 1. Press the menu button on the remote. The on-screen menu is VIZIO VIZIO remote. The on-screen menu is displayed. TIME ZONE displayed.
using the Parental Controls enabling or disabling Program ratings The TV’s parental controls allow you to prevent the TV from To manage program content according to its rating, you must displaying certain channels or programs without a password. enable the Program Rating feature. The Parental Controls menu only appears when: To enable or disable the Program Rating feature: •...
Blocking and unblocking Content by rating Changing the Parental Control Passcode A channel may sometimes broadcast programs that are meant If you use the parental controls, you should change the passcode for children, and at other times broadcast programs that are to prevent children from accessing inappropriate material.
adjusting the CeC settings Turning the Power indicator on or off The CEC function on your TV enables you to control The Power Indicator on the front of your TV normally does not HDMI-connected devices with the included remote without any glow when the TV is on.
To use guided setup: restoring the TV to factory default settings 1. Press the menu button on the All of the on-screen menu settings can be reset to the factory VIZIO remote. The on-screen menu is defaults. displayed. GUIDED SETUP...
uSing the inFo WindoW The Info Window can be displayed by pressing the guide button on the remote: • Press the guide button one time to display channel, input, and display information. • Press the guide button two times to display the program title, program rating, audio information, and the start and end times of the program.
using the usB media Player using The usB media PlaYer Playing usB media To play your USB media: The USB Media Player allows you to connect a USB thumb drive to 1. Connect your USB thumb drive to the USB port on the side of your TV and view photos.
Page 49
Current folder using the arrow and ok Displays the folder path. buttons on the remote. Connected source VIZIO Displays the Photo VIZIO_2GB\Photo\root connected USB USB1: device. Current folder root A.jpg...
Troubleshooting & Technical support DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup •...
Page 51
The TV displays “no signal.” There is no sound. • Press the inPuT button on the remote control to select a • Press Volume up on the remote control. different input source. Press the muTe button on the remote to ensure mute is •...
Page 52
The image quality is not good. i see “noise” or static on the screen. • For the best image quality, view high-definition • When your TV’s digital capabilities exceed a programs using digital sources. Connect your devices digital broadcast signal, the signal is up-converted with HDMI cables.
42" Class Viewable area: 42.02" dimensions w/ stand: 37.71" x 23.80" x 7.66" w/o stand: 37.71" x 22.15" x 2.48" Weight w/ stand: 24.25 lbs w/o stand: 22.05 lbs TV Type: D-LED refresh rate: 60 Hz...
Page 54
Control model: XRT010 UL, FCC Class B, Certifications: HDMI (CEC, ARC), Dolby Digital Compliance: Energy Star 6.0 Voltage range: 120V @ 60 Hz Power Consumption: 54.4W standby Power: <1W...
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST...
legal & Compliance fCC Class B radio interference statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.