Table of Contents
Advertisement
Quick Links
CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
ITEM#: PLT4013A
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean
water, never a
solvent) to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or
by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth(use
clean water,
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth
to dust or
wipe carefully.
Estimated Assembly Time:20 minutes
Part List and Hardware List
PIECE
DESCRIPTION PICTURE
mounting
A
bracket
machine
B
screw
C
backplate
D
washer
E
Cap Nut
wire
F
connector
Assembly Instruction
QUANTITY
1X
2X
1X
4X
2X
3X
1
PIECE DESCRIPTIONPICTURE
mounting
G
screw
ground
H
screw
J
bulb
k
Frame
M
Studs
QUANTITY
2X
1X
1X
1X
2X
Advertisement
Table of Contents
Related Manuals for Safavieh GRAYTER PLT4013A
Summary of Contents for Safavieh GRAYTER PLT4013A
- Page 1 Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. ITEM#: PLT4013A Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent) to wipe the surface of the fixture.
- Page 2 Installation Step 1 Loose the Studs(M) to remove the polyfoam from the Frame(K) Step 2 Install the mounting bracket(A) to the junction box with machine screw (B) Step 3 Wire connection Make wire connections, with wire connectors(F), following the reference chart listed below. Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to: Black...
Need help?
Do you have a question about the GRAYTER PLT4013A and is the answer not in the manual?
Questions and answers