Safavieh Evie LIT4199A Quick Start Manual

Safavieh Evie LIT4199A Quick Start Manual

Product dimensions: 16"l x 16"w x 58"h

Advertisement

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never
a solvent) to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe
carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced
If the cord is damaged, the luminaire shall be destroyed
PIECE DESCRIPTION
PICTURE
A
tube
C
buld

Part List and Hardware List

QUANTITY PIECE DESCRIPTION
3X
B
screwed joint
2X
D
Shade
PICTURE
QUANTITY
2X
1X
Model#: LIT4199A
Product Dimensions: 16"L X 16"W X 58"H

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Evie LIT4199A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Safavieh Evie LIT4199A

  • Page 1 CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
  • Page 2 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes. PLEASE USE ON/OFF TYPE"A"...

Table of Contents