Table of Contents
Advertisement
IS THERE A PROBLEM WITH YOUR IRON?
PROBLEMS
Your iron
produces little to
no steam.
The soleplate
is scratched or
damaged.
The iron steams
once the water
tank has been
filled.
The spray does
not spray water.
The clean filter
alert does not
turn off after the
Micro-Calc filter
cleaning
If you have any problems or queries please call our Customer Relations
See Helpline number in the separate guarantee
POSSIBLE CAUSES
The water tank is empty.
The anti-calc valve is dirty.
Your iron is clogged up with
limescale.
The Micro Calc filter is dirty. Clean the Micro Calc filter.
You have placed your iron on
a metallic iron rest or ironed
over metal zips or fasteners.
The steam control dial is not
set to
.
The water tank is too full.
The water tank is not full
enough.
You did not reset the clean
filter alert
team first for expert help and advice.
and country list leaflet.
SOLUTIONS
Fill up the water tank.
Clean the anti-calc valve.
Clean the anti-calc valve and the
Micro Calc filter.
Always place your iron on its heel
rest when not in use.
Do not iron over metal zips or
fasteners
Ensure that the steam control dial is
set to
.
Do not exceed the max level for
filling.
Add water to the water tank.
Press on the clean filter alert
21
Advertisement
Table of Contents
