SUMMARY IMPORTANT SAFETY RECOMMENDATIONS Important safety recommendations p. 5 ........................Before first use p. 8 ........................................PREPARATION Which water should I use? p. 9 ................................Filling the water tank p. 9 ....................................Adjusting the temperature and steam............. p. 10 Dry ironing ........................p. 11 Getting more steam : turbo boost.
Page 5
IMPORTANT SAFETY INSTRUCTIONS • Please read these instructions carefully before first use. This appliance has been designed for domestic and indoor use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. •...
Page 6
have been thoroughly instructed regarding use of the appliance, are supervised, and understand the risks involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the iron and its cord out of reach of children less than 8 years of age when it is in use until it has cooled down completely.
Page 7
• Check the electrical power cord for signs of wear or damage prior to use. If the electrical power cord is damaged, please contact an Approved Service Centre to avoid any danger. • The iron must always be placed on its base and never on its heel (for cordless irons) •...
BEFORE FIRST USE Remove any labels from the soleplate before heating the iron. Before using the steam function in your iron for the first time, we recommend that you allow the iron to operate a few moments in a horizontal position without coming into contact with your laundry.
PREPARATION Which water should I use? • Your appliance was designed to operate using untreated tap water. • Do not use pure demineralised or pure distilled water, water from clothes dryers, scented or softened water, or water containing additives (starch, perfume, aromatic substances, softeners, etc.), rain water, filtered, bottled or boiled water, water from refrigerators, batteries or air conditioners.
Warning ! Do not fill your iron through the filter opening. Do not remove the Micro Calc filter to fill the tank. • Plug in the appliance. Adjusting the temperature and steam • Set the steam control to • Adjust the temperature control, referring to the table below.
• The temperature indicator light turns on. • It will turn off automatically once the soleplate achieves the desired temperature. Set the temperature control dial to match the type of fabric you wish to iron. Your iron automatically and accurately determines the ideal temperature and steam flow.
Getting more steam : extra steam max. • Set the thermostat control to “•••”. • Note: This setting is only suitable for cotton and linen. • Set the steam control to • Push and hold the steam button. • Keep holding and iron •...
Page 13
sec. • Press the turbo steam button (turbo steam) 1 second, moving the iron from top to bottom. • Hold the iron at a distance of a few centimetres from the clothing to avoid burning delicate fabrics. • After pressing the turbo boost trigger 3 times, put the iron back in the horizontal position and start again.
Dampening clothing (Spray) • When dry or steam ironing, press repeatedly on the spray button to moisten clothing and remove stubborn creases. • Ensure that there is water in the tank before using the spray button. While ironing • Do not lay the iron down on the soleplate; use the heel rest for this purpose.
IRON STORAGE AND MAINTENANCE Storing your iron • Unplug the iron and wait for the soleplate to cool completely (approx. 1 hour). • Empty the water tank. • Set the steam control to Depending on model • Wrap the cord around the heel of the iron. Store the iron on its heel rest.
Cleaning the Micro Calc filter • When the clean filter alert turns on, finish your ironing session and switch off the appliance. • Unplug the iron, empty the water tank and wait for the soleplate to cool down completely (approx. 1 hour). •...
Page 17
• To descale the Micro Calc filter thoroughly rinse it in diluted citric acid for 2 hours. • Rinse it with tap water • Reposition the Micro Calc filter in its housing and turn the tab a quarter turn to the right in order to lock the filter and ensure it is watertight.
Cleaning the anti-scale valve (once per month) • Unplug your iron and empty the water tank. • To remove the anti-calc valve, open the water tank cover and pull on the valve near the steam control. • Soak the valve for 4 hours in a glass of water with diluted citric acid.
IS THERE A PROBLEM WITH YOUR IRON? PROBLEMS POSSIBLE CAUSES SOLUTIONS Water is leaking You are using the steam Wait for the indicator light to turn from the holes in when the iron is not hot off. the soleplate. enough. You are using the turbo Wait a few seconds between each steam button (turbo steam)
IS THERE A PROBLEM WITH YOUR IRON? PROBLEMS POSSIBLE CAUSES SOLUTIONS Your iron The water tank is empty. Fill up the water tank. produces little to The anti-calc valve is dirty. Clean the anti-calc valve. no steam. Your iron is clogged up with Clean the anti-calc valve and the limescale.