Table of Contents
Advertisement
Mount the Computer on a Wall
You can mount the VersaView 200R computer on a wall inside a machine by using
mounting brackets. The brackets secure the computer to the wall.
1. Attach the two mounting brackets to the rear of the computer by using four
of the provided, M3 x 12 mm panhead screws; torque to 0.678 Nm (6 lb-in).
2. Drill four holes in the wall that correspond to the holes in the mounting
bracket.
Dimensions are in mm (in.).
3. Position the computer against the wall, aligning the holes in the mounting
brackets with the holes in the wall.
TIP
4. Insert the remaining screws through the mounting bracket into the wall and
tighten.
For the VersaView 200R computer, use four M3 x 5 mm, panhead screws.
204.20 [8.04]
192.20 [7.57]
172.20 [6.78]
Support the computer with a shelf or other means, to make
installation at the appropriate height easier.
VersaView Industrial Non-display Computers
Publication 6155R-IN001I-EN-P - July 2007
9
Advertisement
Table of Contents
