AB Quality 6155R-NSXPH Installation Instructions Manual page 10

10 VersaView Industrial Non-display Computers
Mount the Computer on a DIN Rail
You can mount the VersaView 200R computer on a DIN rail. The DIN rail bracket
mounts to the bottom or back of the computer.
IMPORTANT
1. Fasten the DIN rail bracket on the bottom or back of the computer by using
four, M3 x 5 mm panhead screws; torque to 0.678 Nm (6 lb-in).
Bottom Mount DIN Rail
Dimensions are in mm (in.).
152.20 [5.99]
Bottom Mount DIN Rail
2. Mount the computer on a DIN rail and secure it by hand-tightening the
fastener, being careful not to strip the screw.
Publication 6155R-IN001I-EN-P - July 2007
Do not mount the computer on a DIN rail in high shock and vibration
environments.
Rear Mount DIN Rail
152.20 [5.99]
Rear Mount DIN Rail