prinker M User Manual page 4

3. Cartridge
3-1. Insert the cartridge
Push the cover button to open the cover;
Insert the M� cartridge all the way in; and
close the cover.
3-3. Spray the skin primer
Spray the skin primer ��cm away
from the intended spot.
Make sure to maintain the
distance to prevent any possible
coagulation.
3-4. Prink
Select your design on the Prinker app and press
"Prink" to send to the Prinker deavice.
When "Press" appears on the device, glide along
the direction of the arrow.
3-2. Connect via Bluetooth
Connect to the Prinker device via Bluetooth from the Prinker app.
The skin primer will dry in less
than �� seconds.
Glide the Prinker device over
the intended spot to display
your design.
Spray the skin primer afterwards
to make your design water resistant.
3-5. Store the cartridge
Please make sure to store the cartridge as follows:
Extract the cartridge from the device and attach the cap.
Store the cartridge by sealing inside the storage bag.