Table of Contents
Advertisement
Module Description
The next four sections give a description and specifications of the
absolute encoder module.
Status Indicators
The module has 10 LED status indicators (Figure 2.1):
Eight output status indicators (one for each output) light when the
corresponding output circuitry is energized.
One green ACTIVE indicator lights when the module is powered and
functioning.
One red FAULT indicator lights when the module detects a fault and
momentarily lights at power-up.
Figure 2.1
Status Indicators
ABSOLUTE
ENCODER
MODULE
Output Fuses
The module has eight 3A rectifier fuses (one per output) located on the
right printed-circuit board. Figure 2.2 shows the fuse locations.
Chapter 2
Introducing the Absolute Encoder Module
Status Indicators
Active
0
1
2
3
Output status
4
Indicators
5
6
7
Fault
2 3
Advertisement
Table of Contents
